If you are a car lover, your car windows must have been properly tinted. Do you know how to clean tinted windows in a car correctly? Everyone washes his or her favorite car frequently to maintain its new and shiny look.
Also, tinted windows in a car provide protection from UV light to reduce heat and help reduce in fading up of your car interior. Some cars come with inbuilt tinted windows. Car windows tinted by factories are not films actually.
But you get it tinted from your nearest mechanic shop, tinting is always done with a film. While washing tinted car windows, you have to take due care as they should not damage in the cleaning process.
Cloning of tinted windows in cars is easy if you followed some easy methods given below
What are tinted windows in a car?
Applying a thin light color film covering your car windows is called tinting. This film is attached to the car window glass with an adhesive.
This tinting process gives you a little privacy while using the car. Also, it gives a sleek and mystifying look to your travel.
Why care should be taken while cleaning tinted windows in a car?
While cleaning tinted windows, there is the possibility that you can capture a corner of plastic film and peel it off.
If a small part of the film gets opened, soon the entire film would be damaged. As a result, you have to spend to repair the same.
So, spending hard-earned money for a little carelessness is not a good thing.
To avoid this unexpected spending, you must know how to clean tinted windows in a car.
Solutions for cleaning tinted car windows.
1. First homemade and safe car window cleaner can be prepared with baby soap and rubbing alcohol. Take 25-30 ml of rubbing alcohol and add some drops of baby soap to it. After mixing add some distilled water as per the required consistency.
2. Adding regular dish soap with warm water is also the best option to clean your tinted car window.
3. Mixture of Vinegar and water in equal parts is also a nice and cheap option for cleaning your car windows.
4. Avoid ammonia-based cleaner solutions. It affects the mechanical bond of adhesive used to tint car windows.
Steps to clean tinted windows in a car
1. Before starting the cleaning, park your car in a shed. If you try to clean the tinted window of your car in shade, it will be easier.
Direct sunlight will dry the cleaner you applied on the car window faster than in shade. So it is always advisable to clean the car windows under a shade.
2. Initially clean the window with water without any cleaner. Applying clean water without adding any cleaner will help you to get rid of easy dirt.
This primary cleaning will remove easy stains and will help you to identify tough spots. Mist the window with water and swipe don the same with a soft cloth towel.
Do not use a paper towel. It will fall to pieces on the car window and increase your pain to clean it again.
3. Choose a tinted window cleaner and apply the same. As mentioned above, you can choose ant tinted car window cleaner mentioned above.
Just avoid ammonia-based cleaners for a safe environment.
Apply the cleaner evenly to the window and clean the same with a soft cloth. While wiping the window, keep the direction from the top towards the bottom.
It will drain the liquid cleaner easily.
4. Get the window down by rolling it to mid-level and clean the top edge with a cloth. The upper side of the window which is always covered in the car body also needs cleaning. You can wipe out the top edge by giving a little extra pressure.
5. Repeat the cleaning process as per requirement. If stains are harder, you may need to repeat the process several times.
But it will help you to clean windows to your satisfaction.
6. in the last, clean your car windows from the inner side. The inner side also gets fingerprints or smudges frequently.
You may assume that car windows can get dirt and stains from outside only as it gets exposed to the outer environment. But you will find that the inner side of the car window also needs cleaning.
After cleaning the window from the inside, you will notice the difference.
Pro tips to clean tinted windows in a car.
1. If you found that three are air bubbles underneath the film on the window here is a pro tip o solve the issue.
Use a small square of plastic or credit card wrapped in a cleaning cloth and push air underneath the film forming bubbles to the nearest edge of the window.
2. If the air bubble is away from the edge or at the center of the widow, you can puncture the bubble using a small pin.
But it is to be remembered that it will create a small hole in the tinted film.
3. For better results you can use Mr. Clean sponge to wipe out water in one direction.
4. Be careful at the edges while cleaning car windows. Don’t catch the film while wiping out the cleaner. You may peel out the tinted film.
5. Always use a rubber squeeze or soft cotton cloth to clean the tinted car window.
6. Do not use harsh cleaning chemicals. It may damage your car window.
7. To apply water and cleaner evenly and on the desired spots, use bottle spray.
8. Warm soapy water will give you the best cleaning results.
9. Do not use ammonia-based cleaners. It discolors and damages tinted windows.
10. Use acetone to remove adhesive glue if you found outside the tinted window.
11. Don’t clean windows immediately after installing tinted film. It takes some time to cure.
12. Using scrapers, razor blades, and abrasive cleaners is strictly prohibited for cleaning tinted windows.
Conclusion:
By now, you must have got the answer to your initial question – how to clean tinted windows in a car? Cleaning tinted windows in a car is not a hard task. By following above mention tips and methods you can easily and confidently clean your car window.
Just keep in mind that, you have to use non-ammonia-based cleaners. These cleaners should be environmentally friendly. If you find that there are air bubbles underneath the film remove them safely without damaging the window.