Best Way to Clean Epoxy Floor

Epoxy floors are durable as compared to other floors. But at the same time, you need to clean and maintain them. You must know the best way to clean epoxy floor. There is a number of epoxy floor cleaners available in the market.

You can choose one of them.

Epoxy floors are widely used in garages, warehouses, and walkways with heavy footfalls.

Epoxy floors are best suited where heavy tools or small to medium type of lifting machinery is being used. Epoxy floors are really tough and withstand heavy weight for a considerably long period.

As any surface gets dirty as a result of constant and heavy use, epoxy floors are no exception and need timely and proper cleaning. Let us learn here how to remove stains from the epoxy floor.

Also, if heavy tools are being used on the floor, there will be some scratches on them. These scratches attract dirt and hold it. If it is not cleaned within the time, it will be hard to get rid of this dirt.

Considering the scenario, you must know the best way to clean epoxy floors as your working place is no less than your home for you.

You must not only right way to clean epoxy floors but also the best epoxy floor cleaner. Acidic floor cleaners are not recommended to clean epoxy floors.

Epoxy floors can be kept clean by following two methods.

First, epoxy floors should be saved from getting scratches from dust, grit, and dirt.

Second, epoxy floors should be cleaned with epoxy floor cleaners on regular basis.

Both the rules mentioned above are covered under the following steps.

Best way to clean epoxy floor.

Here are simple steps to follow to maintain your epoxy floor as good as new.

Step 1: Use a microfiber dust mop or foam mop to clean dust, and dirt from the epoxy floor.

Sometimes you may find that tree leaves from your garden landed on your garage floor.

Using the mop or push broom push all the dust and dirt into the corner. Then transfer it to the dust been. This cleaning is recommended at least once a week.

Step 2: Vacuum hard places on your epoxy floor.

There are some places where your mop or broom cannot reach. You have to vacuum those places such as floor corners, below the deck, and the toolbox area if any.

Cleaning using the vacuum should be done at least once a month.

Step 3: Hard spots from the epoxy floor are to be cleaned immediately.

If you noticed that there are oil or chemical spills on the floor, clean them as soon as you noticed. You can clean these spots using a cloth or paper towel before these spots turn hard to clean.

As time passes, over time these spots became hard to clean.

Step 4: Use cleaners for your epoxy floor.

You have two options to choose from. You can use Ammonia or Simple Green as a cleaner for the epoxy floors. Both are effective on epoxy floors.

I would recommend you to use Simple green as it is safe for you and to the environment as compared to ammonia. Simple Green is bio-degradable and non-toxic cleaner used to clean epoxy floors.

Use hot water for a better cleaning effect. Take one gallon or 3.8 liters of hot water in a bucket and add half a cup or around 125 ml of the simple green solution into it.

Use this solution to clean the epoxy floor.

Over concentrated solution may be hard to clean off and it will leave some traces on the floor.

You can spread the cleaning solution on the floor and rub the floor using a stiff push broom. Start from one side of the floor and push the cleaning solution towards the desired outlet.

You have clean the epoxy floor by moving the broom to and fro.

Also, you may use a hard foam mop to clean the epoxy floor. Just immerse a hard foam mop into the container of cleaning solution and use the same to rub the floor.

Move the mop to and fro for better results.

Step 5: Use Lactic acid-based cleaner to remove rust stains from the epoxy floor.

Lactic acid-based cleaners such as CLR can be used to spot clean rust stains.

It is also effective to get rid of road salt stains on the epoxy floor. To make the solution use equal parts of CLR and hot water.

You have to spot clean stains using a stiff nylon brush.

Step 6: Use a concrete degreaser to clean tire marks on the epoxy floor.

Sometimes, your garage floor may get tire marks.

Use a concrete degreaser to clean tire marks. There is no need for dilution while using a concrete degreaser.

Leave the degreaser on spot for a few minutes and clean the spot using a stiff nylon brush. You may need to repeat the process to clean the marks completely.

Step 7: Rinse the epoxy floor using clean hot water.

After cleaning all dirt, rust stains, and tire marks from the epoxy floor rinse it with clean hot water.

It will help to get rid of the chemical residues you used earlier. At least two rounds of hot water is recommended for a clean wash.

Step 8: Dry the epoxy floor using a soft cloth towel.

Wipe out the floor with the help of a cloth towel to dry it completely.

You can also turn on fans available in your garage or working floor to speed up the drying of the floor.

Precautions to be taken while cleaning the epoxy floor:

• Avoid using soap-based cleaners. It builds haze on the epoxy floor. This haze increased over time.
• Take due precaution while using hot water for cleaning. It may burn your skin. Use proper protection while cleaning with hot water.
• Though ammonia is one of the suggested cleaners to clean your epoxy floor, please make a note that ammonia can harm the environment. Instead of using ammonia, please choose Simple Green as it is non-toxic and biodegradable.

Conclusion:

Now are aware of the best way to clean epoxy floors. By practicing the method explained above, you can keep your epoxy floor clean and neat.

It will give you a fresh look whenever you will visit it. Also, you can choose from epoxy floor cleaners as you have two options mentioned above.