If you need to clean floor tile grout, but don’t want to scrub it with a toothbrush or get your hands messy, there’s an easier way. Steam cleaners are great for getting out stains and dirt on floors, but they don’t remove tough stains like coffee or egg yolk.
One trick of the trade is using baking soda and vinegar paste as a scrubby-scrubby paste that removes tough stains without having to use harsh chemicals like bleach (plus it smells nice).
Steps to Clean Floor Tile Grout Without Scrubbing.
1 Use a steam cleaner.
2 Mix equal parts of baking soda and white vinegar to make a paste.
3 Apply the paste to grout lines and let sit for 30 minutes.
4 Use an old toothbrush or other stiff-bristled brush to scrub.
5 Pour boiling water on grout lines to loosen and lift stains.
6 It’s possible, but you need to be willing to get your hands a little dirty.
Use a steam cleaner.
While scrubbing may be effective at removing dirt from your flooring, it will also scratch the surface and damage the grout.
A steam cleaner is a better alternative because it can clean deep down into cracks in tile floors.
Steam cleaners are available for both home use and commercial applications and are relatively inexpensive compared to other cleaning methods like mopping or power washing.
Because they require very little effort on your part, they’re great if you have limited time but still want to give your floors a thorough cleaning.
Mix equal parts of baking soda and white vinegar to make a paste.
Mix 1 part baking soda and to 1-part white vinegar together in a bowl. If the paste is too thick, add more water until you get the consistency that is right for your floor tile grout.
Make sure the paste stays put on all parts of your floor tile grout lines!
Then, take a scrubbing brush and gently scrub the paste into the grout lines. Rinse off any excess paste and let your floor dry.
Then, take a damp cloth and wipe down your floor tile grout lines.
The entire process should take no more than 20 minutes. If you’re looking for a more thorough cleaning, use a sponge mop with soap and water to scrub the tiles.
Apply the paste to grout lines, and let sit for 30 minutes.
To clean your grout lines, first, apply the paste to a damp sponge or brush. You can also use a toothbrush if you want to get right into those hard-to-reach crevices. Then, scrub away!
The longer you leave this paste on your tile floors, the better it will work at removing dirt and stains from any existing buildup of food particles and other grime that may have built up over time.
Just make sure not to let it sit too long if there are any spots where water has soaked into the flooring material itself (like in an area between two tiles), don’t worry about them; just let them dry before sweeping them up with another application of cleaner solution later on down that line when finally ready for action again!
Use an old toothbrush or other stiff-bristled brush to scrub.
Do not use a toothbrush to scrub the floor tile grout, as it will scratch the tile and cause it to look dull and dingy. Instead, use an old-fashioned bristled brush that has been used by someone else before!
This can be found at your local hardware store or home improvement center for under $20 (you’ll just need two).
First, use a brush with stiff bristles to scrub the grout between each tile. The more dirt and debris that you can remove before applying the dye, the better.
If you do not have a stiff-bristled brush, use a toothbrush and scrub each grout line with it.
This will help to remove dirt and debris that might be stuck in between the tiles. Once you’ve cleaned out all of the grout lines (and if you’re using a new brush), then apply the dye.
The dye should be applied to the grout lines using a paintbrush or a sponge. You don’t need much, and you want to make sure that the dye goes into every crevice of each tile.
If you’re using a sponge, then simply squeeze out some of the liquid onto it and apply it to the grout lines using circular motions.
Pour boiling water on grout lines to loosen and lift stains.
Fill a bucket with hot tap water, and pour over the grout lines (be careful not to get any in your mouth). Let sit for 3-5 minutes, then use a stiff-bristled brush to scrub away stubborn stains.
If your grout lines are extremely dirty or stained, you may need to use a stronger cleaning solution.
Mix one part bleach with three parts water, and apply the mixture to the grout lines using a stiff-bristled brush.
Let sit for 10-15 minutes before scrubbing away stains with your toothbrush and sponge.
Once you’ve removed the stains, rinse your grout lines with clean water and let them air dry.
If you have tile floors in your bathroom, use a damp mop or towel to get rid of any dirt or grime that remains on the tiles after cleaning.
It’s possible, but you need to be willing to get your hands a little dirty.
You might be surprised by how much dirt and grime is hiding under the tile grout in your bathroom or kitchen. The cleaning process isn’t as simple as it looks, so don’t expect this job to go quickly or easily!
If you want to clean tile grout, there are a few things you should know first.
- You’re going to need some time and effort to get it done. You can’t just spray some cleaner on the tile and expect it to come out perfectly clean—you’ll have to scrub!
- You’re going to need some cleaning supplies. If you don’t have any, stop by the store and pick up a few things: scrubbers, bucket, sponge, mop (if possible), bleach (if desired), and water.
- You’ll want to get some elbow grease for this job too. Tile grout is tough and durable, so it’s not going to clean up easily.
- You may need to repeat the process several times before you’re satisfied with your results. It might take a few tries to get all of the dirt and grime out, so don’t get frustrated if it takes longer than expected!
Conclusion
You can clean your tile grout without scrubbing by making a paste of baking soda and white vinegar and applying it to the grout lines.
Let it sit for 30 minutes, then use an old toothbrush or other stiff-bristled brush to scrub away stubborn stains. You may need more than one try before you get it all up, but once you do, your floor will look brand new!