Are you wondering, How to Clean Your Frigidaire Ice Maker? The ice cubes produced by your Frigidaire freezer may look clean, but they probably aren’t as clean as you think—even the stainless-steel ice cube trays that come with some models can harbor mold and bacteria, which then drip into your drinks and food.
There are a few things you can do to keep your ice maker clean—or, at least, cleaner! Keep reading to learn more about how to clean your Frigidaire ice maker!
Steps to clean Frigidaire Ice Maker
- Unplug your appliance
- Uncover the freezer door icemaker
- Test whether it works
- Soak with vinegar
- Remove Ice Buildup
- Reassemble
- Plug it back in
Get the right tools
- A screwdriver.
- A roll of paper towels.
- A bucket.
- Dishwashing detergent, baking soda, and water.
- Isopropyl alcohol or vinegar if you don’t have a bucket handy.
- An old toothbrush (optional).
First, unplug your appliance
Frigidaire recommends that you always unplug the appliance before beginning any cleaning process. This will help prevent accidental shock, electrocution, and personal injury.
After unplugging the appliance, it is important to check your owner’s manual as there are different ways of removing the blades depending on what type of ice maker you have.
Once you have removed the blades, place them in a dishwasher-safe container with water and detergent. You can also use a plastic container with water and lemon juice or vinegar.
Related Reading: How to Clean Black Appliances without Streaks?
The next step is to remove all of the food or debris that may be in your ice bin by running hot water over it and scrubbing it with a sponge.
Uncover the freezer door icemaker
- Pause the water supply by turning off the hot and cold faucets at the sink. This will stop the water from running through the icemaker and make more dirty, cloudy cubes.
- Unplug your fridge or turn off its circuit breaker (or unplug it if you don’t know which one). If you’re not sure where it is, consult your instruction manual or call an electrician for help.
- Remove all of the ice trays from inside the freezer and set them on a surface outside of your fridge so they don’t freeze up again while you’re cleaning. The way they are built, they might be able to hold some water in place long enough to give you some more time before freezing up again.
- Open the freezer door and remove any ice trays that are stored in front of the ice maker assembly.
- Take out the screws holding the back cover plate in place with a screwdriver and remove it carefully, being careful not to let any small pieces fall into your fridge’s inner workings–you’ll want to keep those for later use when putting everything back together!
- Gently push down on the top of the ice maker until it comes free from its bracket. Be gentle! You don’t want to break anything as you pull it out.
- Grab a big bucket, preferably one with a lid, fill it up halfway with warm water, and pour in 1-2 cups of white vinegar.
- Put the entire icemaker back in the bracket and lower it down until you feel resistance; then push firmly but gently until you hear a click sound as it locks into place.
- Put the backplate over top and replace all screws (gently!)
- Re-attach the freezer door by plugging your fridge back in or flipping whatever breaker switch was turned off earlier.
Test whether it works
The instructions are simple. Fill a plastic cup with water, add two tablespoons of dish soap and a teaspoon of salt, shake it up and pour it into your ice maker.
Let the mixture sit for about five minutes, then run the machine until it spits out all of the gunk that was hiding in there. Wipe off any remaining grime and you’re good to go!
Soak with vinegar
To clean your freezer, start by turning off the power and unplugging it. Next, take a damp cloth and wipe down the exterior of the freezer with a vinegar-soaked cloth.
If you have hard water stains, use a mixture of vinegar and water in equal parts.
Once you’ve cleaned the exterior, go ahead and clean out the inside of your freezer too. Remove all food items (if there are any) from the inside of your fridge so they don’t get contaminated.
Take out all shelves and drawers (or baskets) before wiping them down with a vinegar-soaked cloth as well as any other places where there may be dust or dirt on them.
Remove Ice Buildup
If you have an ice maker, it’s important to clean it regularly. The tray can become clogged with tiny bits of food and minerals that cause the cube shapes in your refrigerator door to be inconsistent and chunky.
Removing this buildup will also help the machine produce more ice faster.
To clean your Frigidaire, fill a bucket or container with two cups of vinegar, then submerge the tray in the liquid for about 15 minutes.
Remove the tray from the vinegar bath and use a cloth or paper towel to scrub away any residue on its surface and inside crevices with a gentle motion. Rinse thoroughly with water before returning it into place.
Reassemble
- Unplug your refrigerator from the power source and open it up.
- Using a dishcloth and some warm water, wipe down the front and back of the ice maker until all dirt and grime are gone. You can also use a few drops of dish soap if you have stubborn stains or dried milk on there.
- When the surface is clean, remove any debris from the inside of the machine by rinsing off any loose pieces with warm water or by wiping them away with a damp cloth.
- Place a towel on top of your ice maker and firmly press down on it so that any liquid inside will drain into the sink below it.
Plug it back in
Clean your ice maker by unplugging the unit, removing the water, and opening the rear access panel. Use a damp cloth with dish soap and wipe down all surfaces.
Remove any buildup that you can see. Let it air dry before plugging it back in.
Conclusion.
After going thru the above-step by step guide, you can defiantly clean your Frigidaire Ice Maker for sparkling ice cubes! It will also protect you from illness as you will enjoy clean ice now.